Term of Use

1- Pull the clench on the fore-end mounted on the barrel of your shotgun.

2- Detach the fore-end from the barrel.

SÖKÜM 1

3- Push lever on the receiver of the stock of your shotgun to right.

4- Place the barrel in the receiver to let the receiver and barrel make an angle of 40 degrees as seen in the picture. Make sure that the barrel is completely placed into the receiver. Otherwise, the barrel would not close.

SÖKÜM 2

5- Make sure that the receiver and the barrel are totally engaged to each other when you close the barrel by upholding the barrel and also make sure that lever is placed as closed.

6- Place the iron curved part of the fore-end fully onto the receiver as seen in the picture and slightly pat from the outer side with your palm. Make sure that the lock lever of the fore-end is completely closed .

SÖKÜM 3

7- Switch for safety by pulling the safety latch on the receiver back.

8- Open the barrel by pushing the lever to right side and pushing the muzzle down.

SÖKÜM 4

9- Place the shot shells suitable for the diameter and chamber of the shotgun (12-16-20) in a way to completely locate on extractor.

10- Close the shotgun tightly.

SÖKÜM 5

ATTENTION ! YOUR SHOTGUN IS NOW LOADED AND READY TO FIRE. AFTER CHOOSING YOUR BARREL (SELECTOR), YOU CAN SHOOT BY RELEASING THE SAFETY BY PUSHING THE SAFETY LATCH FORWARD.

FIELD STRIP AND MAINTENANCE

11- Pull the latch on the fore-end.

12- Remove the fore-end from the barrel.

SÖKÜM 1

13- Open the lever by pushing it to right side.

14- Remove the barrel by pressing down.

SÖKÜM 2

15- Clean the inner side of the receiver and junctures of the barrel and lubricate slightly.

16- Clean the inner side of the barrel with ramrod and lubricate slightly.

NOTE:

There is no need of any kind of maintenance for your shotgun at the level of user apart from these processes.

Consult to authorized service for any failure or further maintenance.

Shoot after cleaning the protective oil on your shotgun.